|
ASA Aircraft Fuel Tester
|
|
Fuel Test Cup
|
|
Fuel Tester / Separator - 12oz
|
List Price: $6.95
Our Price: $4.95
You Save $2.00
|
|
|
List Price: $9.35
Our Price: $5.95
You Save $3.40
|
|
|
List Price: $19.95
Our Price: $14.95
You Save $5.00
|
|
|
|
|
|
|
Protect yourself from fuel contamination by visually checking the fuel for water and debris. Fits all quick-drain valves and has an adapter for recessed drains. The transparent cylinder is 6" long with octane color-coding molded in the side. Also includes a screwdriver blade with both Phillips and slotted heads.
|
Protect yourself from fuel contamination by visually checking the fuel for water and debris. Clear cup with a reinforced steel pin that works with most aircraft. Measures 2-1/2" high x 1-3/4" diameter. Lifetime warranty.
|
The 12oz. Gats Jar fuel testers are used to collect, pre flight inspection, fuel samples. It then separates any co-mingled fuel and water, by allowing only the fuel to be poured back into the tank through our special built-in filter which traps the water behind. This allows the fuel samples to be returned to the aircraft instead of being thrown on the ground. After the water is trapped in the container, and the fuel is back in the tank, the captured water can then be thrown on the ground without polluting the soil, and the ground water with leaded fuel. Studies indicate that over 3 million gallons of AVGAS gets poured on the ground in this country every year just by sampling fuel during pre flight inspections. This product is the only "environmentally responsible" fuel tester on the market. It also filters out particulate fuel contamination, and makes octane recognition simple and certain.
|
|
|
|
Metal Push-Pin for Gats Jar
|
|
3/4" Cessna Pitot Cover
|
|
5/8" Pitot Cover
|
|
Our Price: $5.00
|
|
|
List Price: $12.95
Our Price: $10.95
Sale Price: $9.95
You Save $3.00
|
|
|
List Price: $15.95
Our Price: $10.95
You Save $5.00
|
|
|
|
|
|
|
Replacement fuel sump actuator for the GATS Jar Fuel Tester.
|
|
Pitot tube cover with bright red heavy nylon "REMOVE BEFORE FLIGHT". Fits Beech singles & twins, Cessna Citation, Conquest, 300/400 Series, Lear, Mitsubishi, Mooney, Piper Navajo and Cheyenne to name a few.
|
|
|
|
Pitot Cover - 3/4 inch
|
|
Pitot Cover - 5/8 inch
|
|
Pitot Tube Cover - ASA
|
|
Our Price: $9.95
|
|
|
|
Our Price: $9.95
|
|
|
|
Our Price: $9.95
|
|
|
|
|
|
|
This pitot tube cover fits snugly over 3/4" pitot systems, found on Cessna 150, 152, 172, 177, 182, 200 Series, Skymaster, and the Falcon jet. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.
|
This pitot tube cover fits snugly over 5/8" pitot systems, found on Cessna 300 series, 400 series, Citation, and Conquest, Beech singles and twins, Piper Navaho and Cheyye, Mooneys, Mitsubishi, Lear jets, and Cirrus airplanes. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.
|
This pitot tube cover fits snugly over blade-type pitot systems typically found on Piper Cherokee, Warrior, and Arrow aircraft. They are vented to prevent pressurization of the pitot-static system. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.
|
|
|
|
Universal Pitot Cover
|
|
Prop Banner - For Sale
|
|
|
|
Our Price: $10.95
|
|
|
|
Our Price: $28.00
|
|
|
|
|
|
Fits and protects heated pitot tubes on most aircraft.
|
Each banner measures 33 1/2" long by 12" wide. Sold in pairs
|
|
|
